Search for Job Vacancies and Career Opportunities in Nigeria

Several Vacancies At Saipem Contracting Nig. Ltd.

Date Posted: 07/Nov/2013
Deadline: 19/Nov/2013
  • Specialization Engineering
  • Industry
  • Experience 0 year(s)
  • Location Nigeria

 

Saipem Contracting Nigeria limited (SCNL) Saipem is an international player, one of the best balanced turnkey contractors in the Energy Sector and a leader in the provision of Engineering, Procurement, Project Management and Construction Services, with unique capabilities in designing and executing large scale onshore and offshore projects.
Saipem has a strong bias for operating in deep water and remote areas. It has significant technological competence in new Energy Solutions.

Welding Superintendent (2)
Job Code: WE042

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 10 years' experience in all welding process.

 Responsibilities

  • Organize, coordinate and control the Welding Activities, both performed by subcontractors or in direct hiring, ensuring the management of interfaces with Project Production Superintendents,
  • Methods Disciplines, Welding Engineering and Quality Control.

Apply to: [email protected]

 

 

Construction Superintendent (5)
 Job Code: CAD043

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 10 years' experience in fabrication/erection.

Responsibilities

  • Coordinate and supervise the work activities on board in order to ensure good performance, minimise cost and meet established deadlines and project specification, respecting safety and quality procedures and standard,
  • Ensure that offshore projects are completed according to policies and procedures.

Apply to: [email protected]

 

 

Fabrication Supervisor (19)
Job Code: CAD044

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 5/10 years' 'experience in the fabrication industry.

Responsibilities

  • Supervise the execution of fabrication works, both performed by subcontractors or in direct hiring, ensuring full compliance with safety and quality standards and procedures and verify that works are correctly carried out in accordance with project documentation and in the planned time frame.
  • Provide support to connect assemblies and complete the end product, including Mechanical Completion, hydraulic and leak tests, preparation for sea transport, offshore hook-up and load out.

Apply to: [email protected]

 

 

Welding Supervisor (18)
Job Code: WE045

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 5/10 years' experience in the structural and piping process.

Responsibilities

  • Assist the Welding Foreman during the welding production activities of the project through all its operational phases to reach the safety, quality and productive targets.

Apply to: [email protected]

 

 

Machine Shop Supervisor (3)
Job Code: WE046

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 10 years' experience in 3D pipe cutting process.

Responsibilities

  • Ensure safe maintenance execution of Machine Shops, compliant with HSE rules, legislative regulations and international standard.
  • Set and promote Leadership in Safety attitudes.
  • Lead, supervise and provide support to team members in terms of technical and individual performance capability.

Apply to: [email protected]

 

 

Mechanical Supervisor (6)
Job Code: PEMM047

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in on engineering discipline with 10 years' experience in mechanical maintenance.

Responsibilities

  • Supervise the execution of mechanical works, both performed by subcontractors or in direct hiring, ensuring full compliance with safety and quality standards and procedures and verify that works are correctly carried out in accordance with project documentation and in the planned time frame.
  • Support the mechanical subcontractors or the direct hiring personnel ensuring the feasibility (availability of drawings and materials) of the works.

Apply to: [email protected]

 

 

Junior Cost Controller (4)
Job Code: CCE049

Prospective candidate must have A Degree/ Higher National Diploma in any Engineering Discipline with a minimum of 3 years' experience Cost control and management techniques. 
Knowledge of relevant software (SAP).

Responsibilities

  • Manage cost control system in order to support the PM decision-making process and allow completing the project within the approved budget.
  • Ensure any deviation from budget is promptly spotted and analysed, final impact is estimated and the effect of corrective actions taken is monitored.
  • Satisfy Company and Corporate requirements for the cost control reporting, cooperating with the proper interfaces.

 Apply to:  [email protected]

 

 

Quality Control Supervisor (4)
Job Code: QCS054

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 5-7 years' experience Welding QC supervision.

Responsibilities

  • Coordinate and optimize NDT activities through all its phases in order to achieve targets, quality and productivity as well as manage the activities of Welding QC Inspectors

Apply to: [email protected]

 

 

NDT Supervisor (5)
Job Code: DCM056

Prospective candidate must have A Degree/ Higher National Diploma in Engineering with a minimum of 5 years 'experience in NDT activities.

Responsibilities

  • Coordinate and supervise NOT activities on site in compliance with stipulated technical, safety and quality procedures, respecting the project deadlines and cost requirements looking at the best compromise between Quality and Productivity both in case of internal service and subcontracted service.
  • Train personnel and help to achieve an increased level of autonomy.

Apply to: [email protected]

 

 

Construction Manager (2)
 Job Code: CAD058

Prospective applicants must have A Bachelor's Degree/ Higher National Diploma in an Engineering discipline with 10/15 years' experience in fabrication/ construction industry.

Responsibilities

  • Ensure the direction of the project construction activities, both performed by subcontractors or in Direct Hiring, supervising multidisciplinary construction works according to contract requirements and project objectives.
  • Ensure time, costs, quality, safety targets are met, through direct coordination and management of a project construction team, interfacing with project organization, subcontractors and clients.
  • Support project management in defining, monitoring and updating project execution plans.

Apply to: [email protected]

 

 

NDT Specialist (5)
 Job Code: DCM057

Prospective candidate must have National /Higher National Diploma in Engineering with a minimum of 3/5 years 'experience in NDT technique required.

Responsibilities

  • Process and technological knowledge specialized on NDT and AUT technologies and equipment.

Apply to: [email protected]

 

Welding QC Inspector (2)
Job Code: WE053

Prospective applicants must have A Bachelor's Degree/ Higher National c Diploma in an Engineering discipline with 2-4 years' experience in the Welding QC activities.

Responsibilities

  • Execute the field welding inspection, surveillance and quality control C activities on site, collecting the  relevant objective evidences.
  • Ensure that all welding operations are executed in accordance with all relevant Codes of Practices and Company procedures / practices /Quality Control Plans /Inspection Test Plans

Apply to: [email protected]

 

Dimensional Controller (5)
Job Code: DCM052

Prospective candidate must have A Degree/ Higher National Diploma in Civil Engineering or any related field with a minimum of 4 years' experience in topography and skilled.

Responsibilities

  • Ensure the project is carried out in accordance with dimensional project specifications and corporate standards.
  • Support production activities the quality department and other disciplines to achieve satisfactory results within their area of responsibility.
  • Issue relevant documentation and records in accordance with the applicable project quality system.

Apply to: [email protected]

 

Junior Method Engineer (2)
Job Code: PEMM050

Prospective Degree/ Higher National Diploma in Engineering with a minimum of 3/5 years 'experience in issuance methods statements for fabrication , project.

Responsibilities

  • Be responsible for technical integrity and compliance with estimated costs and deadlines throughout the various engineering phases' of the project.
  • Perform directly engineering tasks to guarantee the quality of the product for methods requirements 

Apply to: [email protected]

 

Method of Application
Qualified persons should send their applications by emails to the specified email address and should state job codes as subject for position applied for not later than two weeks from the date of this publication.

Only shortlisted candidates will be contacted for interview.

Multiple applications will be disqualified.

 







Subscribe to FREE Job Alerts.

 



Subscribe to Job Alert
Filter Jobs
  • Location

    Industry

    Specialization

    Job Type

    Education

    Experience

Latest Jobs and Recruitment in Nigeria Today

JustJobsng is Nigeria's leading online jobs site, providing the latest job vacancies and recruitment in Nigeria in a variety of industries and locations in Nigeria.

Search for all job vacancies in Nigeria here on Nigeria’s #1 Job site. Everything latest jobs in Nigeria, Jobs in Nigeria, recruitment in Nigeria, vacancies In Nigeria and employment opportunities in Nigeria is our forte.

Browse our website and search current job opportunities that meet your search criteria. Our job services are FREE. We strive to post only genuine/Verified Jobs.

Sign up for latest jobs and recruitment offers in Nigeria today!